Pneumatic conveying is also called pneumatic ash conveying and pneumatic ash removal. Its systems include negative pressure suction system and positive pressure blowing system. Changzhou Wanjia is a manufacturer specializing in the production and sales of pneumatic conveying equipment. The equipment is mainly material seal pump. It adopts a positive pressure blowing system, which belongs to a micro positive pressure (low pressure) pneumatic continuous conveying system. It has a reliability that cannot be achieved by any other pneumatic conveying system. Roots blower is generally used, and its high reliability determines the stability and reliability of the system. The main equipment of the pneumatic conveying system, the material seal pump, is simple, without frequent action of the valve in the conventional pneumatic conveying process, and the equipment failure is greatly reduced. The introduction of the whole system is checked, and the conveying pressure is stable, without any impact load. So, the question is, what are the materials that can be conveyed by such a good ash conveying system and equipment?

氣力輸送系統設備料封泵適合輸送粉狀物料、顆粒物料、松散的不粘狀態的物料、粉塵物料、水泥、粉煤灰等?？奢斔途嚯x的范圍，從投資和生產費用來說，常州萬佳為10m到500m，輸送管道為全密封輸送，再管道的設計上，無論是水平傾斜還是垂直都是適用的，輸送的物料都可在操控室進行云距離操作，完全達到自動化操作。特別是輸送含有粉末的物料時，在密封的管道輸送，無粉塵、無泄漏、更沒有二次污染，對健康和都有著重要意義。

Pneumatic conveying system equipment material seal pump is suitable for conveying powder materials, granular materials, loose non-stick materials, dust materials, cement, fly ash, etc. In terms of investment and production costs, the range of transportable distance is from 10m to 500m in Changzhou Wanjia. The transmission pipeline is fully sealed. In terms of pipeline design, both horizontal and vertical are applicable. The transported materials can be operated at cloud distance in the control room, fully achieving automatic operation. Especially when transporting materials containing powder, it is of great significance to health and safety to transport them in a sealed pipeline with high efficiency and environmental protection, without dust, leakage and secondary pollution.

氣力輸送系統、氣力輸送系統是典型的流體力學、工程通用、化學工程的交叉學科，要求設計者的基礎理論扎實，并有較豐富的實踐經驗，結構尺寸及工藝參數的確定除理論計算外，更重要的是靠經驗數據的積累。根據不同的工藝線，確定結構尺寸、內部配管及合理的輸送管徑，才能取得好的經濟效益。

Pneumatic conveying system and pneumatic conveying system are typical interdisciplinary disciplines of fluid mechanics, general engineering and chemical engineering. It requires designers to have solid basic theory and rich practical experience. Besides theoretical calculation, the determination of structural dimensions and process parameters is more important to rely on the accumulation of empirical data. According to different process lines, determine the structure size, internal piping and reasonable conveying pipe diameter to achieve good economic benefits.

以上的精彩內容由江蘇氣力輸送設備進行閱讀，想要知道更多有用的知識，歡迎點擊：http://tgzgw.cn。

The above wonderful content is recommended for reading by Jiangsu Pneumatic Conveying Equipment. If you want to know more useful knowledge, please click: http://tgzgw.cn 。