使用過三葉羅茨鼓風機的用戶們都知道，該設備具有振動小、結構簡單、運行平穩、噪音低等特點，如果在運行過程中三葉羅茨鼓風機出現了異常響聲，有可能是因為機器出現了故障。
Users who have used the three leaf roots blower know that the equipment has the characteristics of low vibration, simple structure, stable operation and low noise. If the three leaf roots blower makes abnormal noise during operation, it may be due to the failure of the machine.
1、缺少潤滑油造成的軸承損壞，導致葉輪間隙變化，造成葉輪碰撞。預防方案：定期檢查油箱，避免缺油的現象。解決方案：返回廠家更換軸承和葉輪。
1. The bearing damage caused by lack of lubricating oil leads to the change of impeller clearance and impeller collision. Prevention plan: regularly check the oil tank to avoid oil shortage. Solution: return to the manufacturer to replace the bearing and impeller.
2、電機螺絲松動，造成皮帶松動，導致風量、壓力減小。解決方案：調緊皮帶，固定電機。
2. The motor screw is loose, resulting in loose belt, resulting in reduced air volume and pressure. Solution: tighten the belt and fix the motor.
3、風機內部進入雜物導致。如果過濾不慎，會有雜物進入風機內部，造成風機葉輪和機殼之間出現刮擦，出現這種情況后，只需停止運轉，卸下進口消音器，將風機里面的雜物清理掉即可。
3. Sundries enter the inside of the fan. If there are sundries in the fan and the inlet of the filter, they will only be wiped off if they are accidentally removed, which will cause the sundries to enter the fan and stop the filter.
4、皮帶罩安裝螺絲松動導致。擰緊螺絲即可。
4. Loose mounting screws of belt cover. Tighten the screws.
5、管道堵塞，造成壓力升高，風機出現聲音變大。這種情況下趕緊停機。否則會燒壞電機。檢查管道、清理堵塞處。
5. The pipe is blocked, causing the pressure to rise and the sound of the fan becomes louder. In this case, stop the machine immediately. Otherwise, the motor will be burnt out. Check the pipeline and clean up the blockage.
6、風機進口濾清器堵塞。由于雜質較多，進口濾清器里的海綿由于雜質積累而堵塞。這時候應該更換過濾棉。
6. The fan inlet filter is blocked. Due to many impurities, the sponge in the inlet filter is blocked due to the accumulation of impurities. At this time, the filter cotton should be replaced.
The above is the detailed introduction of Roots blower for Zhejiang sewage treatment. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://tgzgw.cn/
TEL:400-9901-557
TEL:18678880998
公司地址：山東省濟南市章丘區相公街道大康村村南
濟南道源豐達機械制造有限公司
備案號：魯ICP備2022009540號-1 魯公網安備37018102000745號
